Replacing Collision Sensor

Removing And Installing/Replacing Collision Sensor For Left Or Right Side Airbag


WARNING!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.


Turn ignition key to 0 position.
Remove left or right front seat.
Remove entrance cover strip.







Fold up carpet in area of front seat. If necessary, remove rear compartment heating duct.







Disconnect connector.







Release screws and remove impact sensor for side airbag.

Installation:
Arrow (1) on impact sensor for side airbag must point to sill.
Observe tightening torque, 65 77 2AZ.