Fog/Driving Lamp: Service and Repair

Removing And Installing/Replacing Left Or Right Fog Lamp Insert (M/aerodynamics Package)

Special tools required:
- 64 1 020

Version 1:







Place special tool 64 1 020 in opening (2) and unclip trim (1) in direction of arrow.

Installation Note: Make sure trim (1) engages correctly.







Release screw (1).
Feed foglamp insert (3) in direction of arrow out of outer guides (2) and remove.
Disconnect plug connection behind it and remove foglamp insert (3).

Installation Note:
Make sure foglamp insert (3) is correctly seated in outer guides (2).
Make sure ventilation grommet of foglamp insert (3) is laid without kinks and is sufficiently firmly seated.
If necessary, adjust fog lamp.

Version 2:







Unclip trim (1) in direction of arrow.

Installation Note: Make sure trim (1) engages correctly.







Release screw (1).
Withdraw fog lamp insert (2) in direction of arrow.
Disconnect plug connection behind it and remove foglamp insert (2).

Installation Note:
Feed lugs (3) into outer guides (4).
Make sure ventilation grommet of foglamp insert (2) is laid without kinks and is sufficiently firmly seated.
If necessary, adjust fog lamp.