Plug System Elo/Elo-Power

Plug System Elo/Elo-Power

In-line Plug 3-,6 Pin System Elo-Power 2.8







- Press unlocking hook (1) in direction of arrow and disengage. Then unlock locking hook (2) and remove lock.







- Press down arrestor hook (3) with screwdriver and pull out cable with contact towards rear.

In-line plug 4-,1O Pin System Elo







- Slide connector lock (1) off of main connector body.







- Push the lock tab of the connector being removed down (3) with pin or small screwdriver in the primary lock slot(4) and pull the wire out (5) to the secondary lock position (6).







- Push the lock tab down again in the secondary lock position and remove wire completely.

In-line Plug 6-,50 Pin System Elo







- Unlock lock (Fig. 14/1).







- Unfasten cable clip (Fig. 14/2).







- Slide connector lock (1) off of main connector body (2) (Fig. 14/3).







- Push the connector plate (3) out of connector shell using a small screwdriver through hole on end of connector body (Fig. 14/4).







- Push the lock tab of the connector being removed down (6) with pin or small screw driver in the primary lock slot (7) and pull the wire out to the secondary lock position (8) (Fig. 14/5).







- Push the lock tab down again in the secondary lock position and remove wire completely (Fig. 14/6).