Blower Motor: Service and Repair

Removing And Installing/Replacing Heater Blower

Removing upper section of instrument panel trim. Service and Repair







Remove foam rubber mat.







Unfasten clips and pry out ventilation duct.







Slide connecting rail to one side.

Installation:







Slide connection rail over both linkages until the ends of both linkages are visible in the bore (1).







Pull both linkages out of the flaps.







Unfasten clips and remove blower cover from lugs (1).

Installation:
First insert lugs in the cover, then attach the clips.







Remove connector, unfasten screws and remove blower.