Monitor Display Unit, Replacement

Remove On-board Monitor.





Caution!
Place the monitor on the Antistatic-pad from the special tool kit 127200 and ground it.

Unfasten screws and fold back frame.





Unfasten screws and pull monitor forwards to remove.





Caution!
Before pushing the monitor in, cover the flat strip (1) with the installation cover (2) and push in the monitor.





Install monitor and loosely insert screws. Install the frame, ensuring that the connector is placed correctly on the key panel. Press the display monitor against the frame, (the gap between the display monitor and the frame must be even all around) then tighten the screws.