11 00 ... Mounting Engine on Assembly Stand

Mounting engine on assembly stand (N73)





Special tools required:
- 00 1 450 00 1 450 Assembly Stand
- 11 0 000 11 0 000 Engine Lifter for Removing and Installing Engines
- 11 0 151
- 11 0 152





- Remove engine Removing and Installing Engine.





Fit engine to special tool 00 1 450 00 1 450 Assembly Stand:

Important!
Only raise engine on locating lugs provided for this purpose.

Layout of front engine mount.

Illustrations show N62.





Layout of rear engine mount.

Note:
Illustrations show N62.





Raise engine with special tool 11 0 000 11 0 000 Engine Lifter for Removing and Installing Engines.





Remove carrier bracket on cylinder bank 1 to 6.
Fit special tool 11 0 151 to cylinder bank 1 to 6.





Remove carrier bracket on cylinder bank 7 to 12.
Fit special tool 11 0 152 to cylinder bank 7 to 12.





Install engine in special tool 00 1 450 00 1 450 Assembly Stand.
Snap locking pin (1) into place.
Close locking detent (2) on right and left and screw down.