Removing and Installing/Replacing Right Eccentric Shaft Sensor

11 37 040 - Removing and installing/replacing right eccentric shaft sensor (N73)





(cylinder bank 1 to 6)

Necessary preliminary tasks:
- Read out DME fault memory.
- Remove right cylinder head cover Removing and Installing/Sealing Right Cylinder Head Cover.

Note:
Illustrations show N62.





Unfasten screws.
Remove eccentric shaft sensor (1).
Tightening torque: 11 37 1AZ 11 37 Variable Valve Gear





Assemble engine.
Check function of DME.