Opening Convertible Top In Event of A Technical Fault

54 34... Opening Convertible Top In Event Of A Technical Fault







Open side windows.
Remove plate (1).
Unlock convertible top with double offset Allen key (from tool box) by means of screw (2).







Remove side trim panel at rear left and right.
On left and right, undo fastening (1) (adhesive tape) of hydraulic lines.
On left and right, pull fixture (2) into front engagement position.
On left and right, unclip hydraulic cylinder.
Open convertible top.

Installation:
Pay attention to routing of lines.
Lines must not be kinked.