Replacing Rear Seat (Load Through System) (Touring)

Removing And Installing/Replacing Rear Seat (load Through System) (touring)







Lift out left/right finisher (1).







Installation:
Guides (1) and detents (2) may not be damaged.







Unfasten screws (1) and take off left/right bracket (2) (mounting bracket of separating net on floor assembly).







Version with child's seat:
Fold up child's seat (1).
Unfasten expansion rivets (2) and lift out left/right cover (3) toward front/downward.







Installation:
Cover guides (1) may not be damaged.

Version with child's seat:
Unfasten left/right nuts.







Lift rear seat somewhat, unfasten screw, take off left seat belt lock with center lower strap and remove rear seat from vehicle.

Installation:
Install rear safety belt.
Install rear seat with 2nd person (guide belt locks into rear seat).