Adjusting Front Axle (With KDS) (High)

Adjusting Front Axle (With KDS)(High)

Caution! On cars equipped with Electronic Damper Control, it is essential after wheel alignment to perform a "steering angle check/adjustment" with the BMW Diagnosis System.

Adjust toe and toe-difference angle.





Move steering gear into straight-ahead setting (marks on housing and steering shaft).





Loosen clamping screws on track rods.
Adjust toe-in of wheel by turning the track rod precisely to nominal value, refer to Suspension Specifications.

Installation: Ensure that the ball joints are not twisted.
Tightening Torque, refer to Suspension Specifications.