Overhaul

51 11 001 Replacing Front Bumper

Remove complete front bumper.

Replacing center section of front bumper (support beam):







Remove both front trim rings (1).
Detach expansion rivet (2) from bumper carrier (3).







Detach expansion rivet (1) and remove bumper carrier towards rear from bumper (2).

Note:
- The following work step ends here
- "Replacing center section of bumper (support member) at front".

Replacing front bumper (bumper trim):







Remove high-beam headlights.
Remove metal nuts (1) and (2) on left/right.
Remove insert (3).
Detach mucket (4) from bumper (6).







Release rivet (1).
Release screws (3).
Remove washers (4) and metal nuts (5) and remove insert (2).

Installation:
Make a note of number of washers (4).