ULF-SBX-H Interface Box High

Compatibility check for USB devices
Systems concerned: ULF-SBX-H for R56/ E65/ E60/ E87/ E90/ E70

The diagnosis of the ULF-SBX-H interface box High is only possible for systems approved by BMW. All the information on this topic can be found in the current USB product information valid for your country. More precise information on the storage location of the current USB product information that applies to you can be obtained from your subsidiary.

Procedure for compatibility check of the present USB device
1. Download the current version of the USB product information.
2. Compile USB device data:
- Designation of USB device
- If applicable, software version of the USB device
3. Compile control module data:
- control module software version (BMW part number)
This control module software version is displayed at the start of the test module "Fault profiles USB device" as well as in the test module "Read USB device data".It can be also be read out at the DIS tester at control-module functions --> Identification.
4. Use the USB device data, control-unit data and the USB product information to determine whether the present USB device is approved by BMW for this vehicle.

Note: The diagnosis functions offered on the DIS tester apply to recommended USB devices. If the USB device is approved in the product information for restricted use only, the restrictions of the USB device have priority over the diagnosis instructions.