51 16 360 - Removing and installing/replacing right glove box

51 16 360 - Removing and installing/replacing right glovebox





Note:
Open glovebox.

Unclip pin (1) from retaining strap (2).





Unclip pin (1) from shock absorber (2).





Note:
Close glovebox (3) and secure against falling out.

Release screws (1) and remove counter-support (2).
Open glovebox (3) and remove.





Installation:
Make sure counter-support (1) is correctly seated on chamfered faces of shaft (2).
If necessary, turn shaft (2) accordingly.





Replacement:
Remove lock for right glovebox Service and Repair.