Removing and Installing/Replacing Lock for Left or Right Rear Seat Backrest

52 24 311 - Removing and installing/replacing lock for left or right rear seat backrest





Note:
Perform emergency actuation for rear seat backrest (1).

Release screws (2).
Tightening torque: 52 24 08AZ 52 24 Rear Seat (Normal, Manual).





Remove rear seat backrest and set down forwards.
Remove lock (1) completely from installation opening.





Display bridge (1) can be pressed out of lock during emergency actuation.
Remove display bridge (1) from lock.
Display bridge (1) does not have to be reinstalled.





Installation:
Slide guide lug (1) of lock into opening (2).





Adjusting lock:
- Slacken screws

- Firmly push engaged rear seat backrest back

- Tighten down screws

Important!
Check backrest lock without fail.