Removal and Replacement

17 11 046 - Removing and installing / replacing module carrier





Necessary preliminary tasks:
- Remove radiator cover Removing Radiator Cover
- Remove fan cowl Service and Repair with electric fan
- Drain coolant Service and Repair
- Remove radiator Removing and Installing Radiator
- Draw off fluid from power steering

Installation:
Bleed power steering unit Bleeding Power Steering (Version with Dynamic Drive)

- Unlock hydraulic lines on cooling loop and disconnect
- Secure A/C condenser against damage and against falling down.





Press lock (1) and remove holder (2) downwards.
Illustration shows the left holder: The same procedure applies to the opposite side.

Installation:
Rubber mounts fall out easily, ensure correct installation position.





Remove module carrier (1) towards bottom.





When replacing module carrier:
Convert power steering cooling loop Service and Repair.