Test Conditions for Chassis/Wheel Alignment Check

32 00 ... - Test conditions for chassis/wheel alignment check

Observe the following test conditions prior to the chassis/wheel alignment check:
1. Correct and identical rim and tire sizes.
2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
3. Correct tire inflation pressure (see instruction plate on car).
4. Wheel bearing clearance OK
5. Steering backlash OK
6. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
7. Cars with ride level control: Pull fuse of air supply unit so that there is no controlling down or up.