Compressor to Condenser

64 53 642 - Replacing line from compressor to condenser (S85)

fig_refbm-GRRA0000-WARNUNG

Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant.
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil .

fig_refbm-GRRA0000-ACHTUNG

Important!
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow instructions for opening and replacing parts in refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system

fig_refbm-GRRA0000-INFO

Necessary preliminary tasks:
- Drawing off, evacuating and filling the A/C system are not included in the time value given for this work operation
- Remove right intake filter housing

fig_refbm0409e64B-GRRA5136_45

Important!
Do not place front panel centre section (2) on jump start terminals.
Do not kink Bowden cables of engine hood/bonnet lock.

Release screws (1).

Remove front panel centre section in direction of arrow and place to one side.

fig_refbm_e60A-GRRA6416_02

Release screw (1).

Installation Note:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 1AZ .

fig_refbm_e60A-GRRA6416_03

Undo screw (1) and feed out refrigerant line (2).

Installation Note:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 6AZ .

fig_refbm-GRRA0000-INFO

After installation:
- Evacuate and fill A/C system