CCC Navigation System - Stuck On 'Accept' Screen
SI B 84 20 06Phone, Navigation Systems
September 2006
Technical Service
This Service Information bulletin supersedes S.I. B84 20 06 dated June 2006.
NEW designates changes to this revision
SUBJECT
CCC Navigation Stuck on "Accept" Screen
MODEL
E90, E91 (3 Series) with SA609 CCC Navigation
E60, E61 (5 Series) with SA609 CCC Navigation
E63, E64 (6 Series)
SITUATION
The customer states that sporadically, it is not possible to acknowledge the "Accept" button on the navigation system disclaimer screen using the controller.
CAUSE
1. Faulty Controller
2. CCC software
PROCEDURE
Fault currently present
1. Perform a short test on the vehicle and diagnose any CCC (Car Communication Computer) faults first.
2. The following steps are only valid if the Controller fault is currently present.
3. Select "Control Module functions" using DIS/GT1.
4. Select "CON Controller" from the control module list.
5. Select "Diagnosis requests" and "-Control knob".
6. Select "Pressure function" and "Display"
7. Press down on the Controller and the display should change from "not pressed" to "pressed".
8. If the status does not change or an error is displayed, replace the Controller.
9. If the status change is correct for the controller, perform a battery reset to regain functionality of the Controller. Do not replace any parts if the Controller is working properly. A future version of Progman will correct this fault.
Fault NOT currently present
1. NEW On a customer complaint basis only, update the complete vehicle per SI B09 05 01 (Coding, Individualization, Programming) Procedure B:
- NEW E60, E61, E63, E64 use Progman V23.00.00 (Target Data Status E060-06-09-520) or higher.
- NEW E90, E91 use Progman V22.02.00 (Target Data Status E089x-06-06-540) or higher.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Defect Code Refer to KSD
Labor Operation: Refer to KSD
Labor Allowance: Refer to KSD
Disclaimer