Checking/Topping Up Fluid Level (GA6HP19Z / 6HP19Z)

00 11 237 Checking/topping up fluid level in automatic transmission (GA6HP19Z/6HP19Z)

Important:
Use only the approved transmission fluid.

Failure to comply with this requirement will result in serious damage to the automatic transmission.





Installation.
Tighten down filler plug using
1. Hexagon wrench 8 A/F
2. torque wrench
3. Socket 8 A/F





Topping up transmission fluid after a repair:
Stand vehicle on a level surface and secure against rolling off.
Undo filler plug (1).

Installation: Replace sealing ring.

Top up transmission fluid until it emerges from filling orifice.
Start engine.
Replenish transmission fluid until it emerges from filling orifice.
Screw in filler plug (1).

7AZ Oil filler plug
A5S 325Z 30 Nm
A5S 310Z/A5S 560Z 100 Nm
A5S 440Z M18x1.5 35 Nm
A4S 270R /A4S 310R 33 Nm
A5S 360R/ A4S 360R M14 18 Nm
A5S 300J 40 Nm
GA6HP26Z/GA6HP19Z 35 Nm
GA6HP26Z M30x1.5 80 Nm

Press brake pedal to floor and shift through gears 1 to 6 several times at idle speed. Then shift to "P" position (Park).
Then check fluid level.

Checking fluid level:
- Connect BMW Diagnosis and Information System (DIS) or BMW MoDiC to vehicle.
- Call up Service functions (drive).
- Carry out fluid level check in accordance with instructions.