Replacing Pulse Generator on Exhaust Camshaft (M52TU/M54/M56)

12 14 524 - Replacing pulse generator on exhaust camshaft (M52TU/M54/M56)





Necessary preliminary tasks:
- Check stored fault messages.
- Switch off ignition.





Location:
On cylinder head at front on exhaust side.
Unlock plug (1) and detach from pulse generator.





Release screw (1) on cylinder head.
Remove pulse generator.

Installation:
Check sealing ring for possible damage, replace if necessary.





Note:
Interrogate fault memory of DME control unit.
Rectify faults.
Now clear the fault memory.