Body - Rear Windows Move in Small Increments

SI B 61 20 06
October 2006

General Electrical Systems
Technical Service

This Service Information bulletin supersedes S.M. B61 200 04 dated February 2004.

SUBJECT
Rear Windows Move in Small Increments

MODEL
E60 (5 Series)

SITUATION
The customer may complain that the rear windows only move in small increments.

CAUSE
Rear windows are not initialized.

PROCEDURE
Program the KBM (Body Base Module) via the Special Measure programming path.
1. Start CIP

2. Select "Load Software"

3. Answer "No" to "Have control modules been replaced?"

4. Select the "KBM" from the control module list.

5. Select "Programming" then "Special Measure".

6. Finish the programming and retest for proper window operation.





Disclaimer