Terminal 30G Relay

Terminal 30g Relay





The Terminal 30g Relay prevents increased closed-circuit current consumption by switching off electric loads.
The switch-off procedure disconnects various electric loads in a defined manner from the vehicle electrical system. This happens approximately 60 min after terminal R "OFF." The deactivated electric loads are activated again together with terminal 30g "ON."
The terminal 30g relay is actuated by the car access system.
Power to the following control units is managed by the terminal 30g relay:
^ Center console switch center
^ Rain and low beam sensor
^ Controller
^ Central information display
^ Slide/tilt sunroof
^ Satellite radio
^ TOP HiFi amplifier
^ Telephone
^ Head-up display
^ Active cruise control
^ Electronic transmission control/SMG
^ Dynamic stability control
^ Adaptive cornering light