Replacing Decorative Strips for Steering Wheel (Up To 03/07)

32 33 ... - Replacing decorative strips for steering wheel (up to 03/07)





Special tools required:
- 61 3 120 61 3 120 Feeler Gauge for Steering Wheel Trims / Stalks





Necessary preliminary tasks:
- Remove airbag unit Removing and Installing/Replacing Airbag Unit





Release screws (1).

Important!
Risk of breakage!
Carefully remove multifunction steering wheel switches with decorative strips and retaining plate (2) from steering wheel.

Disconnect plug connections on reverse side and remove retaining plate (2).

Installation:
Make sure connecting cables are correctly routed.
Make sure that decorative strips and both multifunction steering wheel switches are correctly positioned on steering wheel (guide pins must not be damaged).
Tightening torque 32 33 2AZ [1][2]Specifications.





Release screws (1) and remove decorative strips (2).





Installation:
Attach decorative strips (1) to retaining plate (2) (do not tighten down screws (3)).
Lay retaining plate (2) with decorative strips (1) on special tool 61 3 120 61 3 120 Feeler Gauge for Steering Wheel Trims / Stalks.
Tighten down screws (3).