Active Stabilizer Bar

Active Stabilizer Bar





The active stabilizer bar consists of the oscillating motor and the halves of the stabilizer bar with press fitted roller bearings which are mounted on the oscillating motor for connection to the axle carriers. The use of roller bearings ensures optimum comfort thanks to better response and reduced control forces.








The oscillating motor and the oscillating motor housing are joined by one half of the stabilizer bar.
The oscillating motor of the front axle stabilizer bar is fitted with 2 pressure relief valves.
Pneumatic lines are connected to the pressure relief valves. These pneumatic lines end in a filter element (conventional fuel filter) which is inserted in the diagonal strut on the left wheel arch.
The filter element is located in different positions in the engine compartment depending on the mounting position of the various engines.
The positions for the pressure relief valves are fitted with screw plugs on the oscillating motor of the rear axle stabilizer bar.