Steering - Steering Angle Sensor Won't Calibrate/FC 9501

SI B 32 06 06
Steering and Wheel Alignment

March 2006
Technical Service

SUBJECT
Steering Angle Sensor Adjustment

MODEL
E60, E61 (5 Series Sedan and Sports Wagon)
E63, E64 (6 Series Coupe and Convertible)

SITUATION

Steering Angle Sensor cannot be calibrated. Fault Code 9501 is stored in the control module.

CAUSE

Steering angle sensor is not properly installed.

CORRECTION

Install the steering angle sensor by aligning the two arrows.

PROCEDURE





^ Install the steering angle sensor per Repair Instructions RA 32 31 082.

^ Locate the large arrow (1) and align it with the small arrow (2)

^ Perform the steering angle sensor adjustment per Repair Instructions RA 61 31 996.

WARRANTY INFORMATION

Information only.





Disclaimer