Steering - Comfort Exit Feature Inoperative
SI B32 04 05Steering and Wheel Alignment
June 2005
Technical Service
This Service Information bulletin supersedes Service Measure B32 200 04 dated April 2004.
SUBJECT
Steering Column Comfort Exit Feature
MODEL
E60 (5 Series)
SITUATION
Comfort exit feature may not function afier programming with CIP 11.
CAUSE
Steering column is not initialized during programming.
CORRECTION
SZM (Center Console Switching Center) must be initialized after programming.
PROCEDURE
SZM (Center Console Switching Center) must be initialized after programming by following this path:
Control modules: SZM Switching center, center console
Functions: Component activation - Electric steering column
Part functions: Initialization, steering column
Activate
If SZM cannot be initialized, it may be necessary to repeat the initialization procedure up to three times. Replace SZM if the above initialization procedure still cannot be completed after three attempts.
Disclaimer