Workshop Hints

Workshop Hints
Checking Oil Level
^ The vehicle must be parked on a flat and level surface
^ Check the oil level corresponding to the Repair Instructions
^ Observe the oil temperature the permissible operating temperature is between 30°C and +130°C oil sump temperature
Diagnosis of this gearbox can be carried out with DlSplus/GT1. Gearbox operation can be checked by means of the fault code memory, test programs or control unit functions.
The processor of the transmission control unit features a 448 KB internal flash memory and a 256 KB external flash memory (on the main PCB). Approximately 480 KB of this are taken up by the basic transmission program. The remainder of the memory location contains the vehicle specific application data (performed during Programming).

Pressure Adaptation
Pressure adaptation takes place automatically while driving. After conducting repairs on the gearbox or replacing the gearbox, it is necessary to reset the pressure adaptation with the DlSplus/GT
1. A test drive should then be performed for the purpose of driving through all gears.