Removal and Replacement

54 62 005 - Removing and installing/replacing rollover protection





Warning!
Danger of injury!
When the actuators are electrically activated, there must be no persons present in the vicinity of the rollover protection bars.
When a rollover protection bar is mechanically triggered, only one person may be present underneath the protection bar.





Important!
When the actuators are activated, both rollover protection bars are simultaneously triggered.
Trigger rollover protection bar Triggering/Retracting Rollover Protection Bars (BMW Diagnosis System).





Necessary preliminary tasks:
- Stow convertible top in convertible top compartment (open) and support convertible top compartment lid in service position Procedures
- Disconnect plug connection for back-up antenna Removing and Installing/Replacing Back-up Antenna
- Remove air outlet trim grill Service and Repair
- Remove ski bag Removing and Installing / Replacing Ski Bag With Casing





Unlock plug connection (1) on left and right and disconnect.





Unfasten screws and remove rollover bar from top.
Tightening torque 54 62 1AZ [1][2]Roll Bar.

Note:
Carry out function check Triggering/Retracting Rollover Protection Bars (BMW Diagnosis System).