Replacing Seat Cover for Rear Seat

52 24 400 - Replacing seat cover for rear seat





Special tools required:
- 52 0 050 Tools and Equipment





Necessary preliminary tasks:
- Remove rear seat Rear Seat - Normal





Detach retainers in areas (1).
Lever out piping in areas (2) with special tool 64 1 020.





Detaching cover and padding:
- Release all retainers in marked area.
- Remove seat cover from padding.
- Remove remaining retainers from cover and padding

Installation:
- Insert new retainers with special tool 52 0 050 Tools and Equipment.





Replacing cover:
- Pull all trim wires out of seat cover
- If necessary, cut in take-up for trim wires of new cover
- Push trim wires into new seat cover





If necessary, replace head restraint guide (1).
Lever out detent ring (2) with plastic wedge.