Diagnosis

Diagnosis

Diagnosis of the various functions of the CAS are carried out using the Diagnosis Program of the DISplus, GT-1 or MoDiC. The Test Modules are automatically selected based on the faults stored or can be selected on the basis of a customer complaint.

The test modules are developed based on a specific function and may not deal exclusively with only the CAS.




"Expert Mode" diagnosis is available in the Control Unit Functions mask. The available functions are:

- Identification page
- Read fault memory
- Clear fault memory
- Diagnosis Requests
- Transponder data
- Programming data
- Internal hall sensors
- Inputs
- Terminal Statuses
- Remote Controls
- Remote Control battery status