Removing and Installing/Replacing Valve Housing for Left or right Front Lumbar Support (Normal/Electric)

52 14 060 - Removing and installing/replacing valve housing for left or right front lumbar support (normal/electric)





Necessary preliminary tasks:
- Remove rear panel Removing and Installing/Replacing Rear Panel on Left or Right Front Seat Backrest (Normal/Electric) on front seat backrest





Release retaining screw (1).
Disconnect electrical plug connection.





Disconnect air hoses (1) and (2).

Installation:
Make sure air hoses (2) are correctly connected to valve block (color coding: red/blue).
Housing on valve block must not be unclipped (leakage). If necessary, clip housing together.