Removing and Installing/Replacing Rear Underbody Protection

51 47 491 - Removing and installing/replacing rear underbody protection





Underbody protection, gasoline engines
Release screws (1).
Remove underbody protection (2) towards rear.

Installation:
Center underbody protection (2) and tighten down screws (1).





Replacement:
Release screws (1).
Remove heat shield (2).





Underbody protection, diesel engines
Release screws (1 to 3).
Remove underbody protection (4) towards rear.

Installation:
Center underbody protection (4) and tighten down screws (1 to 3).