Removing and Installing/Replacing Airbag Unit (Sport Steering Wheel)

32 34 030 - Removing and installing / replacing airbag unit (sport steering wheel)





Warning!
Observe the following instructions to avoid any risk of injury by the airbag unit.
- Comply with safety regulations [1][2]Safety Regulations for Handling Components with Gas Generators for handling components with gas generators.
- Do not exert any force on the airbag unit.
- Use only specified tools for releasing the airbag unit.
Note: Incorrect handling may result in triggering of the airbag unit and thereby cause serious injury.





Important!
Steering wheel Removing and Installing/Replacing Steering Wheel must be replaced if airbag unit has been triggered!
Follow procedure after airbag triggering 72 12 ... Procedure After Airbag Triggering As Result of an Accident.





Necessary preliminary tasks:
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead





Insert a suitable tool (1) (approx. 6 mm dia.) (e.g. pin punch, Torx screwdriver) through bore holes (2) in steering wheel until a springy resistance can be felt through annular spring (3) of airbag unit.
Unlock airbag unit by pressing screwdriver (1) in.

Installation:
Align airbag unit with steering wheel and press in.
Do not pinch wires.





Warning!
Danger of injury!
Airbag unit may only be set down with the airbag itself facing upwards.





Pull out steering wheel module (1) slightly, unlock and disconnect plug connection (2).
Remove airbag unit (3).





Replacement:
Disconnect plug connections on airbag unit and remove connecting cable.

Installation Note:
Connect plugs to connections of same color on airbag unit.