Left Exhaust Camshaft

11 31 1AZ Left exhaust camshaft bearing cap nuts (N62/N62TU)





Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must not be mixed up.

First pass: Fit bearing caps R A2 to R A5





Note:
Retaining clips (1) for oil line are fitted on bearing caps 3 and 5.

Second pass: Insert nuts and tighten by hand without play
Third pass: Tighten down nuts on bearing caps R A2 to R A5 in 1/2 turn increments evenly from inside to outside
M6 10 Nm
M7 14 Nm
M7-8.8 15 Nm
M8 20 Nm





Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must not be mixed up.

Fourth pass: Fit bearing cap R A1 in such a way that marking is legible from inlet side
Final pass: Tighten bearing cap R A1 nuts
M6 10 Nm
M7 14 Nm
M7-8.8 15 Nm
M8 20 Nm