Removing and Installing/Replacing Drive Unit for Electric Steering Column Adjustment.

67 64 010 - Removing and installing/replacing drive unit for electric steering column adjustment





Necessary preliminary tasks:
- Move steering column into "lower" and "extended" position
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead
- Remove panel for active knee protection, left





Note:
For purposes of clarity, graphic shows steering column removed.

Unlock plug housings (1) and remove from holder (2) in direction of arrow.

Disconnect plug connections (3).





Important!
Do not bend or twist drive shafts when removing!

Release screws (3) and feed out drive (1) in direction of arrow.

Installation:
Replace screws (3).
Tightening torque 32 31 12AZ [1][2]Specifications.





Installation:
Drive shafts must be inserted exactly in guides (2).
Check plastic bearings (1), replace if necessary.