Functions

Functions

Telephone

The following functions are available for voice control of the telephone:

- "PIN input"
The user can enter the PIN number of the telephone card by voice.

- "Switch telephone on"
The telephone can be activated by voice.

- "Dial number"
The user can enter any telephone number by voice. If the number is completely detected, the dial-up process is started by voice command.

- "Store names"(internal to the SVS)
The user can associate names and telephone numbers by a dialog and enter them into the phone book in the SVS. The entries are made in sequence. The overall memory capacity is 100 names. When you store names by voice, make sure that a sample comparison is made with the names already stored in the phone book.

- "Select names"
The names stored in the SVS internal phone book can be addressed by voice. The corresponding phone number is then transmitted to the phone and the connection is established.

- "Dial repeat"
This functions repeats the last number dialled.

- "Display list of SMS / E-mails"(planned)
This function displays a list of all SMS (Short Message Service) received by the telephone on the Control Display.

- "Read phone book"(SVS internal)
The phone book inside the SVS is read sequentially. You can jump back and forth in the phone book by voice commands. The user can use a voice command to select the entry which has just been read from the phone book. Then the telephone connection is established.

- "Delete a phone book entry"(SVS internal)
The user can delete a single entry from the phone book. By voice, the user must enter the name corresponding to the entry to be deleted. For security reasons, the user must confirm it before the entry is really deleted.

- "Delete a phone book"(SVS internal)
The user can delete all entries in the directory. For security reasons, the user must confirm it before the entry is actually deleted.

Navigation

The following functions are available for voice control of the navigation system:

- "Store destination"(SVS internal address list)
The user can associate names and destinations by voice and enter them into the phone book inside the SVS. The entries are placed in sequence. The overall memory capacity is 50 names. When you store names entered by voice, make sure that a sample comparison is made with the names already stored in the directory.

- "Select destination"(SVS internal address book)
The names stored in the SVS internal address book can be addressed by voice. The destination corresponding to the name is then transmitted by voice command to the navigation system and the route guidance starts.

- "Destination input"
The destination input menu of the navigation system is activated.

- "Destination Home"
The navigation system takes the home address as the destination address and starts the route guidance.

- Route guidance on/off
Controls route guidance display

- "Information on/off"

- "Map"

- "Set scale"
With this function, you can change the scale of the map. The user can define the scale directly by entering scale parameters (500ft, 1 mile, 10 miles, 50 miles etc..). He/she can also enlarge or reduce the scale step by step with voice commands.

- "Store position"

- "Display Point of interest"(POI)
By voice input, the following POIs can be displayed: Hotels / Service stations / Parking at location / Destination.

- "Display new route"

- "Display last destinations"

- "Select highway route"

- "Select country route"

- "Select fastest route"

Radio

The following functions are available for voice control of the radio system:

- "Radio on / off"
- "Radio auto-store"
- "Select AM/FM"
- "Select frequency"
- "Radio station forward/back"

Audio

The following functions are available for voice control of the audio system:

- Audio off

CD Changer/CD Player

The following functions are available for voice control of the CD changer:

- "Select track"

Cassette player

The following functions are available for voice control of the cassette deck:

- "Cassette on / off"
- "Change side"

On-Board Computer

The following functions are available for voice control of the On-Board Computer:

- "Show board computer"

Note Pad (SVS-internal)

The note pad allows recording of voice messages. These are the functions available:

- "Record messages"
You can record several messages. They are stored in sequence. The single messages are separated by a separator word or a signal. Overall, you have 5 minutes available to record messages. 10 s before the memory is full, a visual warning is output on the instrument cluster display. Recording stops if you press the PTT button or after the system detecting a long pause.

- "Read messages"
You can listen to complete Message block or to individual messages. Use the function "forward" or "back" to skip between messages. Between the single messages, a signal or separator word is output.

- "Delete message"
You can delete the complete Message block or individual messages. In particular, you can delete the message you just listened to. For security reasons, the user must confirm before the message is actually deleted.