Removing and Installing/Replacing Four-Bar Lever on Left or Right Rear Seat Backrest

52 25 018 - Removing and installing/replacing four-bar lever on left or right rear seat backrest





Necessary preliminary tasks:
- Remove rear head restraint Removing and Installing or Replacing Left or Right Rear Head Restraint.
- Remove trim Removing and Installing Complete Armrest for Rear Seat Backrest for armrest at rear.





Remove cover (1) upwards out of guide (2).
Detach cover (1) from Velcro-type fastener (5), pull out of guide (4) and lift out completely.
Release nuts (3).

Installation:
Insert nuts (3) with Loctite(R).
Tightening torque, 52 25 1AZ 52 25 Rear Seat (Normal), Electric.

Note:
Backrest is secured with three nuts to body (nut at top/outside is not fitted as standard).





Release screws (1) and remove four-bar lever (2).