Brake Lamp: Service and Repair

63 25 000 - Removing and installing/replacing additional stop light





Lever out catches (1) of ventilation louver for oddments tray (2).
Fold up complete ventilation louver for oddments tray (2) in direction of arrow, disconnect plug connection underneath and remove complete ventilation louver for oddments tray (2) towards front.





Installation:
Make sure ventilation louver for oddments tray is correctly fed:
- into mounts for oddments tray (1)
- into positions (2) of oddments tray (3)





Unclip additional stop light (1) in direction of arrow from ventilation louver for oddments tray (2) and remove.

Installation:
Make sure additional stop light (1) is correctly engaged in ventilation louver for oddments tray (2).