Repair the Problem

Repair The Problem

Repair the problem using approved repair techniques and parts. Having verified, isolated and analyzed the problem the last step is to repair or replace the component. Before installing that shiny new part, take one last step back from the vehicle to ask a final set of questions.

- Could another component have caused this part to fail?
- Were all the instructions in the lest Plan or Diagnostic Procedures followed?
- Is there anything that might have been overlooked?

Confident that the proper diagnosis has been made, complete the repairs.

Steps to Repairing The Problem:
- Follow the instructions in the repair manual.
- Refer to Construction Groups in the microfiche if necessary.
- Follow specific guidelines for wire harness repair or replacement.
- Make proper adjustments after installing the part.
- Perform Coding or Programming if required.
- Make sure another problem is not created in performing this repair.