Air Cleaner Housing: Service and Repair

Removing And Installing Intake Filter Housing (S54)

Turn off ignition.







Lever out expansion rivets (1).
Remove intake hood (2) with intake pipe (3) towards top.







Release hose clamp (1).
Unlock plug (2) and detach.
Open retainer (3).
Rotate upper section of intake filter housing (4) towards top left. Detach intake hose from intake air manifold.
Remove upper section of intake filter housing (4).

Installation Note: Check seal between intake hose and intake air manifold for damage, replace if necessary.







Installation:
Insert retaining lugs (1) in openings (2).

If necessary, remove control unit for left xenon headlamp.


NOTE: Release only screw connection of control unit to body.







Detach screw connection of intake filter housing on body.
Remove air cleaner element (1).
Remove lower section of intake filter housing (2) towards top.







Installation:
Insert intake pipe (1) in intake hose (2).







Install guide rail (1) on intake filter housing on rubber mount (2).