Air Bag Control Module: Service and Repair

65 77 016 - Removing and installing/replacing airbag control unit





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Warning!
Note airbag safety instructions [1][2]Safety Regulations for Handling Components with Gas Generators!
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Remove luggage compartment floor trim 51 47 101 Removing and Installing/Replacing Luggage Compartment Floor Trim Panel
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery and cover
- Remove center console 51 16 200 Removing and Installing Storage Compartment





Unfasten plug connection (1) and disconnect.
Unscrew nuts (2).

Installation Note:
Before screwing down airbag control unit, make sure negative lead (3) is resting on associated stud bolt.
Tightening torque 65 77 1AZ Airbag Triggering Control.

Remove airbag control unit (4) in direction of arrow.





Replacement:
Carry out programming/coding Programming and Relearning.