Front Seat, Normal, Electric

52 14 000 - Removing and installing left or right front seat (normal/electric)





Necessary preliminary tasks:
- Remove head restraint Removing and Installing/Replacing Front Headrest (Normal/Manual).





Warning!
Read and comply with safety regulations for handling airbag modules and pyrotechnical belt tensioners.
Incorrect or improper handling may trigger the pyrotechnical belt pretensioner or side airbag and thereby cause injury.





Adjust front seat as far forward and upward as possible.
Switch off ignition!
Release seatbelt screw (1) and feed out seatbelt strap (2).
Tightening torque 72 11 1AZ Specifications.





Move front seat forwards/upwards as far as possible.
Release bolts (1).

Installation:
Replace microencapsulated screws.

Tightening torque 52 10 1AZ [1][2]Seats.

Move front seat backwards/downwards as far as possible.





If necessary, unclip protective caps upwards.
Release screws (3).

Installation:
Replace microencapsulated screws.

Tightening torque 52 10 1AZ [1][2]Seats.

Move seat runners forward so that they are flush.
Unlock lock (1) and disconnect plug connection (2).

Important!
Cover door sill with protective covers (risk of damage).

Lift out front seat.





Installation Note:
Carpet must not get between seat rails and floor pan in area of fastening points (grating noises).

Tightening torque 52 10 1AZ [1][2]Seats.