Removing and Installing/Replacing Left or Right Rear Light (On Side Panel) (Up To 09/06)

63 21 180 - Removing and installing/replacing left or right rear light (on side panel) (up to 09/06)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove socket housing for rear light Replacing a Socket Housing for Left or Right Rear Light (Up To 09/06)





Unscrew nuts (1,2,3). Tightening torque 63 21 1AZ Rear Light Unit.
Remove rear light (4) in outwards direction from side panel (5).

Installation:
- Observe tightening sequence:
1. Tighten nut (1)
2. Tighten nut (2)
3. Tighten nut (3)
- Make sure sealing frame for rear light Replacing Sealing Frame for Left or Right Rear Light (Side Panel) (Up To 09/06) is correctly seated on rear light (4)
- Make sure gap (outer) is uniform all round between rear light (4) and side panel (5).