Adjusting Rear Axle

32 00 620 - Adjusting rear axle





Special tools required:
- 32 3 030 32 3 030 Setting Tool





Note:
A camber change always means a toe change as well. The camber must therefore be adjusted first.





Adjusting camber:

Replace nut (2) and tighten to 5 Nm.

Turn eccentric bolt (1) to adjust camber to setpoint value.

Tighten nut (2).

Tightening torque 33 32 25AZ Control Arms and Struts (Rear).





Adjusting toe:

Slacken bolts of bearing block by approx. 1 to 1.5 turns.

Attach special tool 32 3 030 32 3 030 Setting Tool to bolt head and pin (1).

Turn special tool 32 3 030 32 3 030 Setting Tool to adjust toe to specified value.

Tighten down bolts.

Tightening torque 33 32 13AZ Control Arms and Struts (Rear).