Removing and Installing Top Right Timing Case Cover

Removing And Installing Top Right Timing Case Cover (N62)
(Cylinder Bank 1 to 4)

Remove right cylinder head cover.

Remove vacuum pump.

Remove both solenoid valves on right side.





Remove cable from holder.





Release screws (1 and 2).

Remove timing case cover (3).





Installation:
Free sealing face (2) on timing case cover (3) of seal debris and clean.





Installation:
Check adapter sleeves (1 ) for damage and correct installation position; replace if necessary.

Free sealing face (2) of seal debris and clean.





Installation:
Replace gasket (1) and check for correct installation position.