Marker Lamp: Service and Repair

Replacing Bulb For Side Marker Lamp, Front Left

WARNING: Follow instructions for handling light bulbs (exterior lights).

EUR only up to 10/2003:







If necessary, disconnect plug connection (1).
Turn bulb holder (2) through approx. 90 degrees in direction of arrow and remove.
Pull bulb for side marker lamp out of bulb holder (2).

N62 only:







Release screws (1).

NOTE: Make sure cover caps (3) and (4) are firmly seated.

Lay equipment carrier (2) to one side.

All from 10/2003:







Press catch (1).
Fold back cover (2) and remove.

Installation:
Make sure seal of cover (2) is correctly seated.







Disconnect plug connection (1).
Turn bulb for side marker lamp (2) in direction of arrow and remove.

Installation:
Make sure sealing ring is correctly seated.

All:

Installation:
Note type of bulb.