PROM - Programmable Read Only Memory: Technical Service Bulletins

• Recalls
  • Recall 10E-A03 - Program DME And EGS OBD Control Units
  • Recall - Reprogramming DME for O2 Sensor Diagnostics
    • Overview
    • Owner Letter
• Customer Interest
  • Drivetrain - Transfer Case Fault Codes 5460/55C4
  • BMW Assist(R) - System Inactive Message is Displayed
  • Engine Controls - MIL ON/Code 27CD Set
  • Engine Controls - Acceleration Delay While Driving
  • Engine Controls - Hesitation/Delay On Acceleration
  • Engine Controls - Intermittent Crank-No Start Condition
  • Engine Controls - SES Lamp ON/DTC's 278B/278D Set
• All Technical Service Bulletins
  • Computers, Controls - Programming VS Veh. Data Status
  • Drivetrain - Transfer Case Fault Codes 5460/55C4
  • Recall 10E-A03 - Program DME And EGS OBD Control Units
  • BMW Assist(R) - System Inactive Message is Displayed
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • A/T - Harsh 2-1 Downshift/Bangs Into Gear On Accel.
  • Computers/Controls - 'Retrofit' Update Programming
  • Engine Controls - MIL ON/Code 27CD Set
  • Computers/Controls - Progman(R) V22.0/V22.0.1 Errors
  • Engine Controls - Progman(R) V21.01 and V21.02.01 Errors
  • Recall - Reprogramming DME for O2 Sensor Diagnostics
    • Overview
    • Owner Letter
  • Engine Controls - Acceleration Delay While Driving
  • Engine Controls - Hesitation/Delay On Acceleration
  • Engine Controls - Intermittent Crank-No Start Condition
  • Engine Controls - SES Lamp ON/DTC's 278B/278D Set