Flex Plate: Service and Repair

11 22 000 - Removing and installing/replacing flywheel (N62/N62TU)





Special tools required:
- 11 4 180
- 11 9 260
- 11 9 262
- 11 9 263
- 11 9 264





Necessary preliminary tasks:
- Remove automatic transmission .
- Remove manual transmission.
- Remove clutch .





Automatic transmissions only:
Block flywheel (1) with special tools 11 9 260 / 11 9 263 / 11 9 264 .
Unfasten flywheel screws.
Remove flywheel (1).

Installation:
Clean threads on flywheel screws in crankshaft.
Flywheel (1) is secured with an alignment pin.
Fit flywheel (1).
Fit new flywheel screws.
Tightening torque 11 22 1AZ .





Manual transmissions only:
Block flywheel (dual-mass) with special tools 11 9 260 / 11 9 262 / 11 9 263 .
Release flywheel screws with special tool 11 4 180.

Installation:
Flywheel (1) is secured with an alignment pin.

Important!
Do not use screw locking varnish.

Tightening torque 11 22 1AZ .