Removal and Replacement

41 61 000 Removing And Installing Hood/Bonnet

Read contents of body, General.

Necessary preliminary tasks:
- Disconnect all cable plug connections







IMPORTANT: For the following work step, secure the engine hood against falling closed.

Disconnect gas-pressure damper from engine hood (1).
Loosen screws (2).
Release screws (3).
1AZ Engine bonnet/hood to bonnet/hood hinge
M8 20 Nm

NOTE: This work step must be carried out with a second person assisting.

Remove hood lid.

Installation:
Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust engine hood.