Removing and Installing/Replacing One Funnel

54 31 130 Removing And Installing/Replacing One Funnel

Necessary preliminary tasks:
- Remove convertible top
- Remove mounting for convertible top compartment middle.
- Remove rear trim from rollover protection system
- Remove wheel arch splash guard







Remove expansion rivets (1).
Remove clamp (2).







Raise cover (2) slightly and feed out funnel (1).
Lever out funnel (1) towards top.







Expose water drain hose at bottom of wheel arch (remove underbody protection) and feed out towards top.

Installation:
- Install water drain hose with aid of a wire and install feed at bottom into sheet metal. Ensure correct seating.
- Seal water drain hose with extrudable seam seal or underbody protection at bottom.